Join us on June 7th 2025 at Speed Zone for the first Brushless Evolution event of 2025!
Rules are posted below and listed under the group's files tab.
Doors open at 8AM
Racing Begins at 10AM
Tech Opens 15min before racing
First Class will be GT4500 followed by 1/32
$15 Pit Pass
$10 Per Class
Track: Engleman
Rules:
GT 4500
Chassis:
• Any commercially available 4” Flexi chassis, current or out of production, may be used.
o Center section and pans must be steel
o No 3d printed / Carbon Fiber pans
• Chassis designed for brushless motors:
o Chassis cannot be cut/bent/altered from its original design
o Motor must be mounted in factory location/orientation.
• Chassis adapted for brushless motors:
o May utilize any adapter bracket, designs that are integrated with the rear uprights are allowed
o Bracket may be affixed to the chassis in any location
o Upright motor mount may be removed to aid in affixing motor adapter brackets to the chassis
o An additional Motor mount cross brace and/or upright support material may be added
o Motors may not hang below chassis
• Body clips, body pins, and/or floating Body pins may be used in the original body mounting locations.
• Rear axle uprights may be braced with a commercially available upright brace or piano wire not to exceed .062" in diameter.
• Lead may be taped or glued to chassis for weight. Tape may be applied for tuning/dampening
• Lead wire retainer may be added
• Any Guide Flag
• Max width: 83mm (3.267”). Track clearance: 0.032” clearance.
Axles:
• Rear: 3/32” axle must be solid steel, no hollow axles.
• Oilites/ Bushings only NO BEARINGS!
Gears:
• Pinion: Any 11t 64p or 72p
• Spur: Any 64p or 72p 3/32”
• Spur Gear may not hang below chassis.
Tires:
• Rear: Any black foam or natural rubber tires, no speed rubber. No minimum size. Maximum width of rear tires is .815"
Controller and Motor:
• Any Non-programmable Electronic Speed Controller (ESC)
• Motors may not be altered from stock manufacturer configuration.
• KC Racing 4500KV Motor (KCR-1106 4500)
• Emax 4500KV Motor (ECO1106-4500KV)
• Parma 4500KV Motor (PAR1304)
Bodies:
• Any DTM, ISRA, Production, or GT style bodies. NO GTP, LMR, LMP bodies
• Body must have three numbers
• Bodies must be cut and mounted on the cutline
• Front wheel stickers are required for chassis that do not have front wheels.
• NO added aero allowed.
1/32
Chassis:
• JKC1 or JKC5
• May utilize any adapter bracket, designs that are integrated with the rear uprights are allowed
• Bracket may be affixed to the chassis in any location
• An additional Motor mount cross brace and/or upright support material may be added
• Motors may not hang below chassis
• Body clips, body pins, and/or floating Body pins may be used in the original body mounting locations.
• Rear axle uprights may be braced with a commercially available upright brace or piano wire not to exceed .062" in diameter.
• Lead may be taped or glued to chassis for weight. Tape may be applied for tuning/dampening
• Lead wire retainer may be added
• Any Guide flag
• Max width: 64mm. Track clearance: 0.032” clearance.
Axles:
• Rear: 3/32” or 2mm axle must be solid steel, no hollow axles.
• Oilites/ Bushings and Bearings allowed
Gears:
• Pinion: 9 Tooth 64p or 72p
• Spur: Any 64p or 72p
• Spur Gear may not hang below chassis.
Tires:
• Rear: Any black foam or natural rubber tires, no speed rubber. No minimum size. Maximum width of rear tires 16mm / 0.629”
Controller and Motor:
• Any Non-programmable Electronic Speed Controller (ESC)
• Board may be mounted in any way as long as it is secured to the chassis and does not hang below the chassis. Tape and / or shrink tubing may be added to protect the board. Additional lead wire, header pins, and / or connectors may be added. Any other modifications to hardware and software are not legal!
• Motors may not be altered from stock manufacturer configuration.
• KC Racing 6500KV Motor (KCR-1106 6500)
• Parma 6500KV Motor (PAR1306)
Body:
• RedFox RFSC30C 1/32” Fast BS 0.007”
• JK B79A 1/32”Ultimate Peugot 908 HDi 0.007”
• Bodies must be cut and mounted on the cutline
• Front wheel stickers
• NO added aero allowed.
Also check out other Sports events in Mount Holly, Workshops in Mount Holly.
