Learn to 3D Model 2: Modeling for Fabrication

Description

In this three-hour class, you’ll dive deep into 3D modeling in Autodesk Fusion specifically for 3D printing and laser cutting. You’ll learn about orientation, support, overhangs, bridging, and other important considerations when designing a part to be 3D printed. You’ll also learn about stock thickness, front and side corners, tolerances, and other things to think about when designing a part for laser cutting. We’ll discuss how to produce files for each of those processes from Autodesk Fusion, take a look at a few examples of these principles in practice, and then you’ll get to try your hand at modeling for 3D printing - creating a design of your own to be printed on our Bambu P1S or cut from wood or acrylic on our 60W CO2 laser!

Class attendees should leave this session with the ability to take a simple design from an idea, through the 3D modeling process, and finally arriving at a physical item - whether laser cut or 3D printed.

Prerequisites

• Familiarity with Autodesk Fusion is required for this class. Not familiar? Check out the first class in this series, Learn to 3D Model 1: Intro to Fusion!
• A laptop and mouse are required for this class. Open Workshops has a limited number of laptops available to borrow on a first-come first-served basis. Please contact us via Eventbrite if you wish to borrow a laptop so we can have it ready.
• Attendees must register for an Autodesk account and install Autodesk Fusion for Personal Use on their laptop or home PC using the following link prior to attending the class: https://www.autodesk.com/products/fusion-360/personal

Also check out other Workshops in Troy.