Cliffhanger trail work (entrance)

Join us for a half-day to delineate the beginning of Cliffhanger 4WD route. Specifically a hundred yards down from the graded road, the trail is over a hundred feet wide, so we'll install fence on either side while leaving plenty of room for multiple lines and parking above the first major ledge. Since this project is so close to Kane Creek Road, volunteers won't need a trail-worthy vehicle. To avoid crowding the worksite, if possible, please park in the lot that's a half-mile before Cliffhanger and either carpool or walk up Kane Creek Road (while watching out for traffic). If you'll park a large trailer, it's best to use the first lot after Kane Creek Road turns from pavement to dirt, then drive up to the second lot where we'll meet at 9:00. Since we'll drill fence holes into slickrock, bring ear and eye protection if you have it, as we only have a few pair to loan. Also bring work gloves, boots, raincoat, sunscreen, hat, snacks, and at least two quarts of water. If you run Cliffhanger afterward, note that the difficulty is rated 8 out of 10. For questions, contact the MTC chair, Clif Koontz (435-259-8334 or Clif at RideWithRespect dot org).

Also check out other Trips & Adventurous Activities in Moab, Entertainment events in Moab.