Summer Rock Comp Mini-Series # 2
Advertisement
Event two of the summer mini-series for our rock comps. We will do the scoring the same as our spring mini-series (you get a point for whatever place you finish in, you want the lowest overall points). Must attend 2 of 3 to qualify for the series, and you can drop your worst finish if you attend all 3. Prizes will be awarded to the top ~3 finishers.
Dates below:
-Sunday June 22nd
-Sunday July 6th
-Sunday Aug 17th
A few changes for this series!
First - we are going to run class 2 AND class 3. They will be separate gates, and drivers can compete in either (or both) classes. C2 will run the usual 30 gates. C3 we will start with 20 gates, maybe 30 if there’s enough interest.
Second, we are changing the rollover rule to allow folks to attempt to self right to avoid the rollover penalty.
Lastly, we are implementing a 15 minute time limit per course. If a driver doesn’t finish the course in that time, they’ll receive a 12 point penalty for each gate not progressed.
Rules for C2 and C3 below:
C2 Non-Sorrca:
-Frame width front bumper required
-Flat or C Channel chassis required -OE Chassis frame rails should protrude forward from the shock towers at least 3/4” past the front axle center line
-2 axle max; No MOA or rear steer
-Max tire size 4.75” (labeled size) -2.2 max wheel size
C3 Non-Sorrca:
-2 axle max; no Motor on axle
-6” max/ 4.76” min (labeled) tire size (no pin tires)
-2.2 max wheel size
-Frame rail or tube chassis only
Dates below:
-Sunday June 22nd
-Sunday July 6th
-Sunday Aug 17th
A few changes for this series!
First - we are going to run class 2 AND class 3. They will be separate gates, and drivers can compete in either (or both) classes. C2 will run the usual 30 gates. C3 we will start with 20 gates, maybe 30 if there’s enough interest.
Second, we are changing the rollover rule to allow folks to attempt to self right to avoid the rollover penalty.
Lastly, we are implementing a 15 minute time limit per course. If a driver doesn’t finish the course in that time, they’ll receive a 12 point penalty for each gate not progressed.
Rules for C2 and C3 below:
C2 Non-Sorrca:
-Frame width front bumper required
-Flat or C Channel chassis required -OE Chassis frame rails should protrude forward from the shock towers at least 3/4” past the front axle center line
-2 axle max; No MOA or rear steer
-Max tire size 4.75” (labeled size) -2.2 max wheel size
C3 Non-Sorrca:
-2 axle max; no Motor on axle
-6” max/ 4.76” min (labeled) tire size (no pin tires)
-2.2 max wheel size
-Frame rail or tube chassis only
Advertisement