Workshop - Introduction to 3D printing with FDM & SLA technology

In this three-hours workshop you will learn how to use a FDM & SLA 3D printers.

FDM technology allows you to produce fast and reliable 3D printed models with different types of filament plastics.

SLA technology allows you to produce high-definition and high-quality 3D printed models with different types of photo-reactive resin material.

By the end of the session, you will have gone through the whole production process of a 3d-printed piece: from preparing your data, to printing and post producing an object, and you will be able to work independently with 3D printers.

Although you don’t need to have any previous experience with 3D printing for this workshop, it is important for you to have some basic knowledge about 3D modeling.

During the workshop you will learn how to:

• Design geometries suitable for prototyping with FDM & SLA printing
• Understand the difference between SLA and FDM printers
• Prepare your 3D file using the PrusaSlicer & Formlabs Preform software
• Use the Prusa & Formlabs 3D printers

By the end of the session, you will have the opportunity to present a project of your own to the instructor, and review the plan you have for 3D printing it.

Completing this workshop, with the corresponding membership, will also grant you access to the Prusa, Formlabs and WASP 3D printers at MotionLab.Berlin.

For this course you will need:

• A laptop with:
• PrusaSlicer software pre installed (You can download the free software HERE)
• Formlabs Preform software pre installed (You can download the free software HERE)

• A mouse with a scroll wheel

Other materials for the workshop will be provided to you and are included in the price.

This workshop is held in English, and in German at specific request.

Also check out other Workshops in Berlin.